My First Template Set

I've Just made my first Template set..
And as always, everything I make is free to use .

Hope you enjoy what little I have to offer to you at this time.
Everyday life and My Group keeps me busy..
I'm working on my third Scrap..
hope I have it here sometime this coming week.

Betty

Download HERE

©BGHsnailtags Mask -

You can Download Here

New Tagger Scrap called Girlie Racing.

You can Download Here

Girlie Racing

Tube by Elias Chatzoudis found Here..

Scrap is mine found here called "Girlie Racing"

Mask is mine also found here called "Mask Group of Four"

Open a 600 X 600 filled with white..Copy and Paste the Paper 2..

Open the Mask and minimize, go to layers, select New Mask Layer,

from Image,select the mask in the drop menu and have the

Invert Mask Data unchecked, Click OK. Merge Group.

This Mask is smaller than the 600 x600.. So you will

use your Deform Tool to pull it into a size that fits..

now Duplicate, Mirror then flip.Pull the top Mask out

so the purple color show more. Close out the white background

and highlight the top mask layer and Merge Visible.

In Effects, Hue and Saturation, hue and sat. lightness,

have the colorize checked, slide the bar to these setting,

hue 185-saturation 81-lightness 2-OK.Go to texture Weave

all setting at 1-Weave color #404040-Gap color #000000 ,

Select All,Now go to adjust, add noise, set at Gaussia-

Monochrome checked, noise at 60%, OK, Select none.

Open the Black and Silver Frame, Copy and paste as new Image,

use magic wand, in center, go to selections, Modify, Expand at X1,

fill with color.Copy and Paste to Mask layers.

Note: I use the Deform Tool to re-size,causes less distortion.

Add Elements, and Tube..

If you want to save a JPEG, open the white

background back up and Mearge Visible.

If you want the clear background, then leave the white closed

and save as PNG.Don't forget the Copy Rights.

TUT by ©BGHsnailtags

Do Not copy and Paste any part of this TUT

Give Credit Where Credit is Due..

Whispers

The Tubes I used are the beautiful art of Barbara Jensen PTU Licensed HERE

The wonderful Scrap is a PTU from Babycakes called Wind Song Here

The Mask used is called Love Notes that is mine andcomes in a pack of four mask found Here

Open a New 600 X 600 flooded with white.Open Paper Thirteen, copy and paste to background,close the org..Open the mask and minimize, go to Layer, New Mask Layer, from Image,drop the selection box tick you mask, have the invert mask date unchecked, OK

Open the BCS Heart frame, using magic wand click all theshadowed areas inside both sides of frame first. You will be clicking several times. When the marching ants are as close to the outer wall of the frame as you can get, then click in the center.Go to selection, modify, expand X1. Tick the Flood paint can,then Pick a nice color that looks good with the Tubes and the scrap.
Filling both frames.

Testing the size of tubes Copy one of tubes and paste to frame, move around and re-size with Deform Tool,when you have it the size you need, copy and paste asnew image, and delete the tube from frame..Do the same with the other Tube..Now we are back to the empty frame, on one heart use the magic wand,go to selection, float, defloat, invert, now grab the mover toll.Copy the tube you want on the side you are doing..paste and use the mover to set tube in place. On Key Board pad hit Delete.Drop Shadow the tube. Repeat the same steps for the other side of frame.

When you have all this,then copy and paste to the background.Re-size to fit. Add the Elements you like. Drop shadow all, add theCopyrights for the tubes.

If saving as png. delete the whitebackground you started with..
Then Merge Visible.If saving as Jig. just merge visible.

TUT by ©BGHsnailtags
Do Not copy and Paste any part of this TUT
Give Credit Where Credit is Due..

Having Coffee With Friend's

Tubes I used are PinUp Toons PTU Licensed found Here

Mask is WSC #12 found Here

The Scrap is mine called Cafe Brown's found Here

Open a New 600 X 600 flooded with white.Open paper 1, copy and paste to background.Open Mask,minimize, go to layers, new mask layer, from image,tick the little button for dropdown, locate the mask and tick,untick the invert mask data.OK merge group.Duplicate, on new layer go to texture-stucco 02-Color type in #705940-settings=size %88-smoothness 24-depth 56-ambience 37-shininess 31-angle 255-intensity 55-elevation 20- tick OK.Back to Texture, tick Mosaic Antique ,settings=columns 25-rows 25-tile diffussion %2-grout width 4-grout diffusion 61-OKOn layer Palette, move textured mask down.

Open the Frame , use magic wand in center,go to selection,modify, epand x2, flood with white, in selectios,select none.Test your tube for size fitting, copy the tube and paste as new layer,using deform tool resize each to fit just the upper shoulder and head.When you have it like you want it, copy the tube and paste as new image.Now delete the tube layer from frame.Again click in center of frame with magic wand, go to selections,float, defoat, invert. Now tick on the mover tool,and copy the resized tube,paste to tag, use the mover to move into place.. now on your key board, click Delete.. Go to selection and select none.

Drop shadow the tube.Place your elements.. Drop shadow all except youe mask layer..

* Now before you merge visible,do you want the white background or do you want it clear so it looks nice on any page color..If you want it clear like mine, go down to the white layerand tick the eye, make sure the background layer is highlighted in blue. Delete..Add you Coperights and merge visible..For the Clear tag you must save as png..

This TUT is a ©BGHsnailtags

Do Not copy any part of this TUT

You may print it out to help you with your tag.

Give Credit where credit is due.